Post your Gerber Technology product questions here on our forum! Start by selecting the category you need help with on the right hand side of the page; then, create your new post. One of our team members (or another forum member) will jump in and help.
Lisa Lowell Gerber Staff 💛
Hello Michele, see the attached 10.3 release notes on page 6 are the system requirements. I would go with the recommended i7 processor the i5 is minimum and I know from experience that it does not perform as well at the i5. If you plan on using AccuMark 3d you will need something more powerful. you also need to make sure the operating system is windows 10 professional version, we do not test on the home editions and people using the home edition have issues. https://www.dell.com/en-us/work/shop/dell-laptops-and-notebooks/sr/laptops/intel-core-i7?appliedRefinements=6084 Here is a link with some computers from Dell. The newer computers do not come with DVD drives so if you have a DVD for software you may have to get an external dvd drive.If you need office on this computer I would recommend purchasing it from microsoft, in the end it's a more cost effective solution then the subscription.
- Lisa Lowell
- Last Active
- Member, Internal GT, Channel Partner Program Role
Hello Dan, The PDS piece annotation does not flip, meaning if the part flips over the Y axis the annotation still remains in the same direction. What I suggest is to use annotation lines instead. The… (View Post)
When I walked the parts together on the sew line, the lines are not exactly the same. I used the match squared corner as Vasyl mentions above. I attached the pieces but did not rename them. unzip the… (View Post)
Are you working with models? If you open a model in Pattern design you will see the name of the model on the tab instead of work area 1, 2 etc (View Post)
There is a known issue with the digitize processing options and setting it to a network storage area. You need to run data scan (CTRL and F5), sometimes a few times. I find it easier to just digitize… (View Post)
Hello SL, No you do not need a rule table. Are the parts already graded? To create the alterations all you need are the parts and an idea or spec sheet on what needs to be done. If you ever need a gr… (View Post)