Post your Gerber Technology product questions here on our forum! Start by selecting the category you need help with on the right hand side of the page; then, create your new post. One of our team members (or another forum member) will jump in and help.

How to hide seam allowance when plotting a marker

JaneJane Posts: 3
What I do wrong, in the same marker with two different model, one has seam allowance shown and the other does not show. Both of them has seam allowance in PDS:

Comments

  • JaneJane Posts: 3

    And I just want to plot cut line, not seam line.

  • Kathy ValadeKathy Valade Posts: 623 Gerber Staff 💛
    Seam is saved on/off in PDS. The seam lines are managed in Annotation Editor. You must define seams with line type for the marker or the plot output. Example: "Label S=LT0"


  • VasylVasyl Posts: 869 ✭✭✭
    edited February 17
    @jane.
    1. Be sure the wrong model has sew line. Some time after conversion it's a regular internal line.  Cos check is it hided/showen together in both models in PDS.
    2. Is the solid perimeter line sew line or cut line in PDS? 

    PS: you can define what internal should plot  in P-Marker-Plot. Check the internal/tools section
Sign In or Register to comment.