Need help with DCS2500

Jwbarnes

T motor not homing

Sandro Palumbo

Hi. With no power machine, check if tools turn on hand. Check for T-belt. Check for some red led or error on cabinet

Jwbarnes

I have replaced the belt and swapped out the cabinet. I replaced the interconnect board on the head and festoon cabinet. I also tried a new galil board.

Sandro Palumbo

and the T Motor ? 90 time on 100 when the T Axis don't turn, the problem is or Belt or Motor

Jwbarnes

Yes I have changed the motor and belt. The motor moves and if I do calibration its moves. But it wont home and during cutting it loses its origin.

Sandro Palumbo

If i understand well, you can calibrate tool angle (the Theta motor move), but when you do the home machine, the Theta motor don't turn ??

Jwbarnes

Yes that is correct.

Sandro Palumbo

Could be the Theta home sensor. If like the Theta motor is already in zero position and then don't  rotate for search the zero point when inizialize. Check for that. It's only idea that i have in this moment  

CarlosMArellano

Jwbarnes said:

I have replaced the belt and swapped out the cabinet. I replaced the interconnect board on the head and festoon cabinet. I also tried a new galil board.

Hi there, 
Have 23 gerbers here, can you give me more information of what you already did? I'll ask our technicians for some guidance on what's happening to you